How To MECMPractical IT. Shared.

The knowledge base

How to Supervise an iPhone Without Apple Business: Intune + Apple Configurator

No Apple Business account? Supervise a company iPhone in Intune with Apple Configurator: the enrollment profile, serial numbers, the Mac wizard and every iPhone screen.

Apple/How-to guide·Reading time: 7 MIN·Video length: 13 MIN

Also available in: Español · Português

No Apple Business account? You can still get a supervised, company-owned iPhone in Microsoft Intune. Apple Configurator on a Mac, one USB cable, and an enrollment profile from Intune are enough. This guide follows Microsoft Learn’s order on a real lab tenant: the Intune side, the Mac side, every screen on the iPhone, and what Intune shows at the end.

What supervision gives you

Apple calls a device supervised when it’s owned by the organization, which gives IT extra control over its configuration. On our iPhone that means things like a lock screen message, and restrictions that only work on supervised devices.

The usual way to get there is Automated Device Enrollment, through Apple Business or Apple School Manager. Microsoft Learn lists when Apple Configurator fits instead:

  • you don’t use, or can’t use, the Apple Business or Apple School Manager portals,
  • your country or region doesn’t support them,
  • you need a wired connection,
  • the devices belong to your organization, new or already in use.

It’s not meant for personal devices. For those, Learn points to user and device enrollment, or app protection without enrollment.

Two paths

Apple Configurator gives Intune two ways in:

  • Setup Assistant enrollment wipes the device and enrolls it while the user sets it up. It needs the serial numbers, it can have a user, and this is the path that supervises. We use it in this guide.
  • Direct enrollment doesn’t wipe anything. You push an enrollment profile from the Mac and the device enrolls through Settings. There’s no user: no Company Portal, no apps that need a user. The profile file is only valid for two weeks.

Neither path works with a device enrollment manager (DEM) account. Some numbers from Learn: up to 5,000 devices per import file, and 75,000 Configurator devices in total.

Versions. Intune supports iOS and iPadOS 18 and later today (checked November 2026). The floor moves with every Apple release, so check Learn’s supported operating systems page.

What you need

  • A Mac with Apple Configurator, a USB cable, the iPhone in your hands, and its serial number.
  • In Intune: the MDM authority set, and an active Apple MDM push certificate. No certificate yet? Here’s how to create one.
  • The iPhone gets erased, so start from the Hello screen. If it’s signed in to an Apple Account, remove it from iCloud first, otherwise activation fails (“Unable to activate”). On our iPhone that meant turning off Stolen Device Protection, then Find My.

Step 1: Create the profile in Intune

  1. Devices > Apple mobile > Enrollment, the Apple tab, under Bulk Enrollment Methods: Apple Configurator. The overview counts the devices: enrolled, ready to enroll and missing a policy.
  2. Manage > Profiles > Create.
  3. Basics: a name and a description. Users don’t see them. Learn notes that the profile name can also drive a dynamic device group.
  4. Settings > User affinity:
    • Enroll with user affinity: the device belongs to a user, who can use Company Portal. Only works with Setup Assistant enrollment.
    • Enroll without user affinity: Company Portal won’t work. Direct enrollment needs this one.
  5. With user affinity, a second setting appears: Select where users must authenticate, Company Portal or Setup Assistant. Learn calls it Authenticate with Company Portal instead of Apple Setup Assistant. Pick Company Portal for multifactor authentication and for password changes at first sign-in. We picked Company Portal.
  6. One timing rule for user affinity: link the user to the device within 24 hours of enrollment, or enrollment might fail and need a factory reset.
  7. Review + create, then Create.

Step 2: Add the serial numbers

Learn’s format is a CSV file with no header: the serial number, a comma, and any detail you like. Up to 5,000 rows per file. Learn’s own example:

F7TLWCLBX196,iPad Air (5th generation) - Blue
  1. Manage > Devices > Add.
  2. Pick the enrollment policy for these serials, so the profile is assigned at import. Overwrite details for existing identifiers replaces the details of serials that are already there.
  3. Browse to the file (Intune counts the identifiers) and select Add. The iPhone shows up with its details and the policy assigned.

Step 3: Export the profile

  1. Back in Profiles, select the profile. The overview shows the user affinity and the devices assigned.
  2. Export profile. Under Setup Assistant enrollment there’s the Profile URL. Copy it: that’s what Apple Configurator needs. It points at your tenant, so treat it like any other tenant detail.
  3. Below it is Direct enrollment, with the ACME profile download. It only works with profiles without user affinity, so it’s greyed out for ours.

Step 4: Prepare the iPhone on the Mac

Connect the iPhone by USB, sitting at the Hello screen. Apple Configurator lists it. Learn notes that Setup Assistant enrollment resets the device to factory settings. Ours was already erased and waiting at Hello, so Prepare went quickly; a device that’s still set up gets erased first, so expect it to take longer.

Learn adds the server first, under Settings > Servers. We added it from inside the Prepare wizard instead:

  1. Select the iPhone and Prepare in the toolbar.
  2. Prepare with: Manual Configuration (Automated Enrollment downloads the configuration from Apple School Manager or Apple Business, which we don’t have).
  3. Add to Apple School Manager or Apple Business stays unticked. Supervise devices: ticked. Allow devices to pair with other computers was ticked too. Next.
  4. Enroll in Device Management Service: open the Server list and pick New Server.
  5. Define a Device Management Service: a name, then in Host name or URL paste the Profile URL from Intune. Learn says you can safely ignore a “server URL is not verified” warning; on our Mac it didn’t show up.
  6. Configurator fetches the trust anchor certificates (the certificate chain for the Intune service). Next.
  7. Sign in to Apple School Manager or Apple Business: Skip.
  8. Create an Organization: the name and an email address.
  9. Supervision identity: choose an existing one or Generate a new supervision identity.
  10. Configure iOS Setup Assistant: choose which screens the user sees. We set Show only some steps and kept Language, Region, Keyboards, Passcode, Touch ID or Face ID, Apple Account and Location Services.
  11. Prepare. You might be asked to authenticate to update trust settings. Configurator waits for the device, downloads the activation record and activates iOS.

When it’s done, the Info pane shows Supervised and a new Organization section. Learn’s last step: disconnect the USB cable.

Step 5: The user sets up the iPhone

  1. Hello, the language, the country or region, and Wi-Fi.
  2. Device Management: This iPhone is owned by howtomecm. Device management is required. Enroll this iPhone, then Configuring iPhone.
  3. The panes kept in Configurator: Touch ID, the passcode, and the Apple Account. Learn notes that app deployments need an Apple Account signed in for the App Store.
  4. Terms and Conditions, Location Services, Stolen Device Protection, and the home screen.
  5. About seven minutes later in our lab, Company Portal showed up by itself. Learn says the automatic install can take some time.
  6. Open Company Portal and sign in with the work account. Set up access: get the device managed, device registration, then checking device settings. You’re all set.
  7. On the Device tab, Company Portal shows the iPhone, with ownership type Corporate.

Check it in Intune

  • Devices > Apple mobile devices: the iPhone is managed by Intune, Corporate and Compliant, with the test user as primary user.
  • Device overview: the tags read Compliant, Corporate and Supervised.
  • Device compliance: both policies compliant. Device configuration: all seven of our profiles succeeded.
  • Managed apps: Microsoft Authenticator and Company Portal, installed.
  • Group membership: our dynamic device group picked it up on its own.

On the iPhone, Settings says: This iPhone is supervised and managed by howtomecm, and the lock screen shows our message, a setting Learn lists for supervised devices.

The catch

  • It’s hands-on: every iPhone needs the Mac and the cable, one by one, and Learn notes that large numbers take time.
  • Per Apple, erasing all content and settings unsupervises the device. To supervise it again, it goes back on the cable.

Sources

That’s the whole path: an Apple Configurator profile with user affinity, the serials, the exported Profile URL, Prepare on the Mac with supervision on, and the user finishes on the iPhone. How many iPhones would you prepare this way? Tell me in the comments.

Comments

Comments are hosted on YouTube for How to Supervise an iPhone WITHOUT Apple Business Manager (Intune + Apple Configurator)

Have a question or something that worked for you? Leave a comment on the video.

Comment on YouTube

Loading comments from YouTube…

Open this video on YouTube

Keep learning